I suggest mentioning that the green wires to be separated are both LIGHT green; one with the black stripe and one without. On my monitor, the difference is not clear.
Step 32 Is there a good technique to assure these pieces are centered on the syringe? The previous section used the motor shaft to assure alignment, but that isn't an option here. The hole diameter on the larger pieces is much bigger than the syringe, so using the syringe as an alignment jig won't work either.
Reputation over time
It looks like this user hasn't gained any reputation yet.
Once they have, you'll be able to view a graph of their reputation gained over time.
Here's a preview of what the graph will look like:
I suggest mentioning that the green wires to be separated are both LIGHT green; one with the black stripe and one without. On my monitor, the difference is not clear.
Is there a good way to align the center of these larger pieces on the syringe center?
Step 32 Is there a good technique to assure these pieces are centered on the syringe? The previous section used the motor shaft to assure alignment, but that isn't an option here. The hole diameter on the larger pieces is much bigger than the syringe, so using the syringe as an alignment jig won't work either.