Thread the strap onto the fastener in the proper fashion so it will secure. There is writing on one side of the fastener, so be sure this is facing away when securing the fastener.
The ladder lock (fig 3 right) is used to keep the straps from flying around loosely. Be sure and thread this onto the strap in the right spot when threading through the shell.
You will know if it is correct because it will not easily slip off. If it is loose and will not tighten very well it is on backwards.
Adjust the strap so it makes a tight fit between the shell and the battery packs. A perfect fit means the caps fit flush against the battery tubes.
Insert a new line below
Insert a new line above
Indent current line
Unindent current line
Delete current line
Navigate to next step.
Navigate to previous step.