Skip to main content
/

Site Navigation

Your Account

Choose Language

Help
Editing Step 9 —

Step Type:

Drag to rearrange

Pull the six gray wires out of the sleeve.

Cut six lengths of heat shrink and put at the ends of the grey wires.

With a heat gun, heat up the heat shrink.

Do this for all grey wires.

When using a heat gun be careful as these wires will get hot.

The heatshrink has an adhesive on the inside that will provides a waterproof layer between the wires and the water.

Re-wrap the six gray wires into the sleeve after the heatshrink cools.