Skip to main content
/

Site Navigation

Your Account

Choose Language

Help

Step Type:

Drag to rearrange

We will now combine the front and rear electronics chassis.

Have the camera mount be oriented with laser sockets as shown in image 1.

Place onto rear chassis with the two square holes at the top.

With your 8mm M3 nylon screw and nut, attach the camera mount onto the controller board acrylic. Make sure to screw on the nut snugly to allow the camera mount to rotate up and down without much resistance.

Use pliers to hold the nut in place while using a flat head to screw in the nylon piece.

There is a screw and nut on both sides.