Skip to main content
/

Site Navigation

Your Account

Choose Language

Help
Editing Step 12 —

Step Type:

Drag to rearrange

Remove the 2 Tenda Homeplug Adapters from their box. DO NOT toss the box or the 2 ethernet wires. They will be needed in future guides. Put aside for now.

Using a flat-tip screw driver, gently twist the tip to crack open the plastic lid from the adapter. Use this as a hinge to open the plastic box, and remove the lid.

Be careful so you do not stab yourself with the screwdriver.

With care, remove the top circuit board (power supply) from the adapter housing. The small circuit board with the LAN input (the bottom one) is the one you want. It should be removed easily at this point.

Do the same with the other tenda. When finished you should have two identical circuit boards. Hardware hacking!