Skip to main content

Site Navigation

Your Account

Choose Language

Help

Step Type:

Drag to rearrange

Place a drop of Loctite into the threaded hole in the propeller.

Place the propeller onto the motor shaft. Ensure the propeller is threaded straight on the shaft and tighten fully.

It helps to use your fingers around the motor bell and/or motor shaft to steady the motor while you tighten the propeller.

Wipe off excess Loctite.

Do this process for both horizontal motors and propellers.

Wait at least 5 minutes before handling motors/propellers. Allow 24 hours for loctite to cure before using Trident.