Skip to main content

Site Navigation

Your Account

Choose Language

Editing Step 69 —

Step Type:

Drag to rearrange

Once the potting in the main endcaps has cured, you can attach the DB-25 connector to the end of the wire harness.

Start by removing the tape that was used to hold the bundle together

Next, measure a distance of 17cm from the inside surface of the endcap, and cut one of the wires from the bundle at that length. Measure twice, cut once- you don't want the harness to be too long or too short by more than about 1cm!

Use the one wire that you've cut as a guide to cut all the remaining wires in the bundle to the same length