Skip to main content

Site Navigation

Your Account

Choose Language

Help
Editing Step 58 —

Step Type:

Drag to rearrange

Now you'll want to take apart the Genius F100 webcam so it can be mounted to the Camera Platform. Start by pulling the camera off of its stand (a strong tug should do the trick)

Next, remove the plastic piece still attached to the camera by unscrewing the small Phillips-head screw that goes through it.

Using small zip ties (you'll have found two of these in each box the ESCs came in), attach the webcam to the Camera Platform as shown. You'll need to double up the zip ties in order for them to reach around the assembly.

You can use scissors or a diagonal cutter to remove excess zip tie material. You'll want the zip tie heads to be positioned so that they don't bump into the E-Chassis main platform when the Camera Platform is looking all the way up or all the way down.

Once everything is secure, you can set the Camera Platform assembly aside for later.