Skip to main content

Site Navigation

Your Account

Choose Language

Help
Editing Step 9 —

Step Type:

Drag to rearrange

Let's cut the syringes! They are used as vent ports for the E-tube end caps. Here's what you'll need

Two BD [REF 309628] syringes

Vice

Hacksaw

Rag or cloth

Sandpaper [around 150 grit]

Hex wrench from kit or small screwdriver (for deburring) use a countersink if you have one

Remove inner plunger rod from syringe and set aside in clean place. The plunger rod will be used to seal the vent hole after assembly.