Skip to main content

Site Navigation

Your Account

Choose Language

Help
Editing Step 28 —

Step Type:

Drag to rearrange

Finally, we'll apply potting around the perimeter of the syringes on the main endcaps.

A modest amount of potting compound will be needed here- it's better to be conservative then to risk allowing potting to overflow into the hole of the syringe.

Place the nozzle of the epoxy gun between the outer perimeter of the protruding portion of the syringe and the inner perimeter of the flange disk hole.

Slowly push epoxy out of the nozzle, again being careful to avoid getting epoxy into the nozzle hole.

It is often easiest to rotate the endcap about it's syringe rather then moving the nozzle around the endcap.