Skip to main content

Site Navigation

Your Account

Choose Language

Help
Editing Step 33 —

Step Type:

Drag to rearrange

Before hooking everything up it is crucial to not forget to epoxy the syringes in place.

Be careful not to allow epoxy to over-flow into the hole of the syringe as this will need to be clear for the syringe plunger (which acts as a pressure relief valve).

Make sure to keep for use later.

This needs to cure before we can flip it over and do the other side. 3 hours for the Hysol and 8-12 hours for the Devcon.

Once it is set, you can get back to testing and hopefully back in the water.