Skip to main content

Site Navigation

Your Account

Choose Language

Editing Step 53 —

Step Type:

Drag to rearrange

Since the o-rings will make a pretty tight fit with the tubes, it is recommended that a lubricant be used on the o-ring to assure the o-ring gets seated properly.

We like to use a common lubricant called "MagicLube" which is available at many hardware stores.

To apply the lubrication to the o-ring, squeeze a small amount of lubrication onto your finger and then move the o-ring through your fingers.

When using lubrication it is recommended that you wear gloves.