Skip to main content
/

Site Navigation

Your Account

Choose Language

Help
Editing Step 51 —

Step Type:

Drag to rearrange

You will use epoxy to create permanent waterproofing for the endcaps. There are a few things you want to keep in mind:

The epoxy has two parts that mix in the nozzle to get an even distribution.

Before you open the tube hold it upside down to allow the air bubble to travel to the top. Air mixed in the epoxy can cause issues.

Remove the cap, as well as the tip and then install the mixing nozzle.

The first part of the epoxy might not be properly mixed so squirt out a little to make sure that the epoxy you do use is evenly mixed.

Wear gloves when handling epoxy and have paper towels on hand to clean any surfaces that it happens to drip on.