Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #30

Edit by Zack

Edit approved by Zack

Before
After
Unchanged

Step Lines

[title] Check O-RingMain Tube O-Ring Seal
[* black] No hairs,Check the fit of the o-ring against the inside of the tube.
[* green] It should have a good seal as show (around 1mm surface contact).
[* red] If it is smaller, or intermittent you may not get a
good engagementseal. Also look for any debris, dust, or other obstructions. A small hair can ruin a dive once at depth.
[title] Check O-RingMain Tube O-Ring Seal
[* black] No hairs,Check the fit of the o-ring against the inside of the tube.
[* green] It should have a good seal as show (around 1mm surface contact).
[* red] If it is smaller, or intermittent you may not get a
good engagementseal. Also look for any debris, dust, or other obstructions. A small hair can ruin a dive once at depth.

Image 1

No previous image

Added

Image 2

No previous image

Added