Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #8

Edit by OpenROV (Sofar)

Edit approved by OpenROV (Sofar)

Before
After
Unchanged

Step Lines

[* black] Attach the LARGE'''large''' zip tie to the outermost hole in the handle as shown. Secure the zip tie. This will provide the actual strain relief between the tether and the ROV.
[* black] As mentioned in the last step, depending on where you cut your tether, cable tie this connection to the handle, or wrap in tape thoroughly with the large zip tie.
[* black] Attach the LARGE'''large''' zip tie to the outermost hole in the handle as shown. Secure the zip tie. This will provide the actual strain relief between the tether and the ROV.
[* black] As mentioned in the last step, depending on where you cut your tether, cable tie this connection to the handle, or wrap in tape thoroughly with the large zip tie.