Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to this Step

Edit by Jono Spiro

Edit approved by Jono Spiro

Before
After
Unchanged

Step Lines

[title] Polypropylene Shell
[* black] Turn the shell upside down so you can remove the protective plastic backing. If you don't have any blue lettering on the inside of your shell, then we already removed it for you and you can go on to Step 2.
[* black] Turn the shell upside down so you can remove the protective plastic backing. If you don't have any blue lettering on the inside of your shell, then we already removed it for you and you can go on to Step 2.
[* black] Start peeling the backing using a utility knife. The folded corners are a good place to start.
[* black] Use your hands to peel back the rest of the sheet.
[* icon_note] You can clean up melted areas of plastic by gently scratching at them with the utility knife -- the polypropylene doesn't scratch too easily if you're gentle.
[* icon_caution] This step produces a lot of small plastic particles and it's recommended that you wear safety glasses to keep them out of your eyes.
[* black] If any holes in the shell still have plastic in them, carefully poke them out (away from your body!) with a screwdriver or utility knife.