Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #21

Edit by OpenROV (Sofar)

Edit approved by OpenROV (Sofar)

Before
After
Unchanged

Step Lines

[title] Mounting Lasers
[* black] Insert wisdom hereCreate a "Laser Calibration Station" (Piece of paper with two X's that are 10cm apart in a straight line).
[* black] Place the electronics assembly on top of the starboard endcap(the one with no wires). This will give the e-chassis a flat level spot for calibration.
[* black] Tape or secure the e-chassis to the endcap and table so it won't move around during calibration. See Fig 3
.
[* black] Insert wisdom hereCreate a "Laser Calibration Station" (Piece of paper with two X's that are 10cm apart in a straight line).
[* black] Place the electronics assembly on top of the starboard endcap(the one with no wires). This will give the e-chassis a flat level spot for calibration.
[* black] Tape or secure the e-chassis to the endcap and table so it won't move around during calibration. See Fig 3
.

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added