Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #10

Edit by OpenROV (Sofar)

Edit approved by OpenROV (Sofar)

Before
After
Unchanged

Step Lines

[title] Soldering Front Pos Battery Endcaps
[* black] Clean each endcap thoroughly, and place the small o-rings on each cap.
[* icon_note] Be sure to put the o-ring on before your solder! Otherwise it will be quite difficult to get the o-ring over the square battery cap piece. If this happens it is easier to un-solder the battery cap, place the ring, and resolder.
[* black] Tin each positive battery wire and solder onto the positive terminal. The wire should not get in the way of the closing battery cap.
[* black] When finished it should look like fig 3. Do this for port and starboard battery caps