Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #2

Edit by Thomas Moye

Edit approved by Thomas Moye


Step Lines

[title] Metal Rods
[* black] Install the complete internal structure in the white polypro shell as before.
[* black] Screw the metal rods onto the M5 316 Jam nuts as shown. There should be enough space on each end for the lock nuts on the outside of the shell.
[* black] Place the rod in the appropriate holes on each side of the ROV shell. This rod should be in the holes closest to the back of the ROV.
[* icon_note] These rods can be positioned in different holes depending on the payload being carried.
[* icon_reminder] Be sure your battery tubes are in position facing forward before attaching the metal rods or they will be stuck in the wrong position.