Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #7

Edit by OpenROV (Sofar)

Edit approved by OpenROV (Sofar)

Before
After
Unchanged

Step Lines

[title] Tether-Strain Relief
[* black] Place the heat shrink over the wires and shrink the tubing with the heat gun.
[* black] You should feel good about the connections and the heat shrink tubing during this step. If you are worried about a bad connection, snip the wires and start over.
[* black] One you feel good about the previous step, attach the tether to the handle as shown with a zip tie. This keeps the tether from getting caught in the propellers.
[* black] As mentioned in the last step, depending on where you cut your tether, cable tie this connection to the handle, or wrap in tape thoroughly with the large zip tie.