Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #6

Edit by OpenROV (Sofar)

Edit approved by OpenROV (Sofar)

Before
After
Unchanged

Step Lines

[title] Tether Soldering Attachment
[* black] The two yellow wires coming the the ROV need to be cut shorter. Cut them so they are ___________________
[* black] Place the remaining 1/4" cable wrap onto the tether spool and move it down the tether so we can move it into position after soldering.
[* icon_note] You can use a heat gun to melt the ends of the wrap to prevent it from fraying.
[* black] Strip and tin the four wires for the tether(two from ROV and two from the tether spool). The two yellow wires for the tether should be routed to the rear of the ROV.
[* black] Place the remaining 1/4" cable wrap onto the tether spool and move it down the tether so we can move it into position after soldering.
[* black] Place two sections of clear heat shrink tubing down onto the tether wires, and then solder them to the yellow ROV wires.
[* icon_reminder] Be sure to place your cable wrap and tubing onto the tether before soldering!!
[* icon_caution] When soldering it is recommended that you wear safety glasses and have air circulation in the room you are working.