Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #6

Edit by OpenROV (Sofar)

Edit approved by OpenROV (Sofar)


Step Lines

[title] Tether Soldering Attachment
[title] Tether Soldering Attachment
[* black] Strip and tin the four wires for the tether(two from ROV and two from the tether spool). The two yellow wires for the tether should be routed to the rear of the ROV.
[* black] Place the remaining 1/4" cable wrap onto the tether spool and move it down the tether so we can move it into position after soldering.
[* black] Place two sections of clear heat shrink tubing down onto the tether wires, and then solder them to the yellow ROV wires.
[* icon_reminder] Be sure to place your cable wrap and tubing onto the tether before soldering!!