Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #17

Edit by OpenROV (Sofar)

Edit approved by OpenROV (Sofar)


Step Lines

[title] Starboar Motor (Green Wires)
[* black] Starting with the starboard side, measure out where you should cut the green wires to solder the motor on.
[* icon_note] You want a length/location that you able to tuck the wires back into the sleeve '''AND''' avoid getting caught in the propeller '''AND''' not rub against the motor bell when it runs
[* black] Cut the wires at the desired location and strip the ends.
[* black] Slide a strip of heat shrink on each leg of the motor. '''REMEMBER TO USE THE CORRECT PROPELLER TO THE CORRECT SIDE'''