Changes to Step #17
Step Lines
| [* black] Starting with the starboard side, measure out where you should cut the |
| [* black] Starting with the starboard side, measure out where you should cut the |
| [* icon_note] You want a length/location that you able to tuck the wires back into the sleeve '''AND''' avoid getting caught in the propeller '''AND''' not rub against the motor bell when it runs |
| [* black] Cut the wires at the desired location and strip the ends. |
| [* black] Slide a strip of heat shrink on each leg of the motor. '''REMEMBER TO USE THE CORRECT PROPELLER TO THE CORRECT SIDE''' |