Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #1

Edit by Eric Stackpole

Edit approved by Eric Stackpole

Before
After
Unchanged

Step Lines

[* black] You'll need the following materials:
[* black] About 55cm (22") of 1/2" PVC pipe. I don't know what the metric equivalent is, but 1/2" PVC has an outside diameter of about 2.25 cm or 7/8"
[* black] Two unthreaded tees and two unthreaded 90-degree elbows for 1/2" PVC pipe
[* black] PVC cement
[* black] Cut one piece of pipe 30 cm (12") long, and two pieces 11.5 cm (4.5") long.
[* black] Sand the ends of the pipe pieces to remove any burrs. Check that the pieces fit into the tees and elbows.
[* black] Using the PVC cement, assemble the pieces into the shape shown in the photographs. Allow to dry overnight.

Image 1

No previous image

Added

Image 2

No previous image

Added