Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #27

Edit by OpenROV (Sofar)

Edit approved by OpenROV (Sofar)


Step Lines

[title] Attach vertical motor plug
[* black] Use '''M2 5mm''' screws.
[* black] Tighten the first screw about halfway, then start the other screw for that plug.
[* black] After both screws are in place and partially tightened, fully tighten them. Turn screws until they begin to become tight. Then give an additional quarter turn (90ยบ).
[* icon_caution] Do not over-tighten screws. Doing so can result in damage to your Trident that would require a return to OpenROV to repair.
[* black] Do a gentle wiggle test on the motor plug to make sure it is securely fastened.

Image 1

No previous image