Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #25

Edit by OpenROV (Sofar)

Edit approved by OpenROV (Sofar)

Before
After
Unchanged

Step Lines

[title] Attach vertical motor to motor cover
[* black] Insert wisdom hereScrew in two M3 6mm motor mount screws. Do not over-tighten screws. Turn screws until they begin to become tight. Then give an additional quarter turn (90º). Do a wiggle test of the motor to make sure it is securely mounted. Do this step for both horizontal motors.
[* black] Insert wisdom hereScrew in two M3 6mm motor mount screws. Do not over-tighten screws. Turn screws until they begin to become tight. Then give an additional quarter turn (90º). Do a wiggle test of the motor to make sure it is securely mounted. Do this step for both horizontal motors.

Image 1

No previous image

Added