Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #23

Edit by OpenROV (Sofar)

Edit approved by OpenROV (Sofar)

Before
After
Unchanged

Step Lines

[title] Install horizontal motor plug screws
[* black] Use '''M2 5mm''' screws.
[* black] On one motor plug, tighten the first screw about halfway, then start the other screw for that plug.
[* black] After both screws are in place and partially tightened, fullyFully tighten them. Turnthe screws by turning until they begin to becomeget tight. Then give an additional quarter turn (90º).
[* black] After both screws are in place and partially tightened, fullyFully tighten them. Turnthe screws by turning until they begin to becomeget tight. Then give an additional quarter turn (90º).
[* icon_caution] '''Do not over-tighten screws.''' Doing so can result in damage to your Trident that would require a return to OpenROV to repair.
[* black] Do a gentle wiggle test on the motor plug to make sure it is securely fastened.
[* black] Do this step for both horizontal motor plugs.