Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #20

Edit by OpenROV (Sofar)

Edit approved by OpenROV (Sofar)

Before
After
Unchanged

Step Lines

[title] Position horizontal motors for mounting
[* icon_note] The horizontal motors can be difficult to properly align in the motor mount, but thereThere is a simple trick to apply leverage in the right spot. This simplifiesspot so the step, though '''it should be done carefully'''motors easily move into place, but '''be very careful'''. Avoid contact with wires and pass-throughs.
[* icon_note] The horizontal motors can be difficult to properly align in the motor mount, but thereThere is a simple trick to apply leverage in the right spot. This simplifiesspot so the step, though '''it should be done carefully'''motors easily move into place, but '''be very careful'''. Avoid contact with wires and pass-throughs.
[* black] Position the motor so that the mounting screw holes on the motor are as close as possible to the mounting screw holes on Trident's body.
[* black] Move one side of the motor under the mounting part on Trident. (shown in photo 1)
[* black] Using a blunt screwdriver, gently press on the other side of the motor mounting part. (photo 2)
[* black] The motor should be able to slide into place such that the holes in Trident's motor mount align with the mounting screw holes on the motor.
[* icon_caution] Again, please be careful. Avoid the screwdriver making contact with wires or pass-throughs
are aligned.
[* black] Move one side of the motor under the mounting part on Trident. (shown in photo 1)
[* black] Using a blunt screwdriver, gently press on the other side of the motor mounting part. (photo 2)
[* black] The motor should be able to slide into place such that the holes in Trident's motor mount align with the mounting screw holes on the motor.
[* icon_caution] Again, please be careful. Avoid the screwdriver making contact with wires or pass-throughs
are aligned.
[* black] Do this process for both horizontal motors.