Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #20

Edit by OpenROV (Sofar)

Edit approved by OpenROV (Sofar)

Before
After
Unchanged

Step Lines

[title] Position horizontal motors for mounting
[* icon_note] The horizontal motors can be difficult to properly align in the motor mount, but there is a simple trick to apply leverage in the right spot. This simplifies the step, though '''it should be done carefully'''.
[* black] Position the horizontal motor up against the motor mount.
[* black] Gently press with a blunt screwdriver on the black part of the motor (right by the mounting screw hole).
[* black] The motor should be able to slide into place such that the holes in Trident's motor mount align with the mounting screw holes on the motor.
[* icon_caution] Again, please be careful. Avoid the screwdriver making contact with wires or pass-throughs.
[* black] Do this process for both horizontal motors.

Image 1

No previous image

Added