Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #20

Edit by OpenROV (Sofar)

Edit approved by OpenROV (Sofar)

Before
After
Unchanged

Step Lines

[title] Position horizontal motors for mounting
[* icon_note] There is a simple trick to apply leverage in the right spot so the motors easily move into place, but '''be very careful'''. Avoid contact with wires and pass-throughs.
[* black] Position the motor so that the mounting screw holes on the motor are as close as possible to the mounting screw holes on Trident's body.
[* black] MoveSlide one side of the motormotor's mounting part under the mounting part on Trident. (shown in photo 1)
[* black] Using a blunt screwdriver, press on the other side of the motor mounting part. (photo 2)
[* black] The motor should be able to slide into place suchso that the mounting screw holes are aligned.
[* black] MoveSlide one side of the motormotor's mounting part under the mounting part on Trident. (shown in photo 1)
[* black] Using a blunt screwdriver, press on the other side of the motor mounting part. (photo 2)
[* black] The motor should be able to slide into place suchso that the mounting screw holes are aligned.
[* black] Do this process for both horizontal motors.

Image 1

Old Version

New Version

Image 2

Deleted