Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #16

Edit by OpenROV (Sofar)

Edit approved by OpenROV (Sofar)

Before
After
Unchanged

Step Lines

[title] Place gaskets on pass-throughs
[* black] Line up the pass-throughgasket holes with the gasketpass-through holes, and place the gasket on top.
[* black] PushGently push down on the gasket a bitgasket.
[* icon_note] You shouldwill likely see a little grease squeeze out the sides of the gasket and through the holes in the gasket.
[* black] Line up the pass-throughgasket holes with the gasketpass-through holes, and place the gasket on top.
[* black] PushGently push down on the gasket a bitgasket.
[* icon_note] You shouldwill likely see a little grease squeeze out the sides of the gasket and through the holes in the gasket.
[* black] Place gaskets on all three pass-throughs.