Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #16

Edit by OpenROV (Sofar)

Edit approved by OpenROV (Sofar)

Before
After
Unchanged

Step Lines

[title] Place gaskets on pass-throughs
[* black] Line up the pass-through holes with the gasket holes, and place the gasket on top.
[* black] Push down on the gasket a bit.
[* icon_note] You should see a little grease squeeze out the sides of the gasket and through the holes in the gasket.
[* black] Place gaskets on all three pass-throughs.

Image 1

No previous image

Added