Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #5

Edit by OpenROV (Sofar)

Edit approved by OpenROV (Sofar)

Before
After
Unchanged

Step Lines

[title] Attach vertical propeller to vertical motor
[* black] Fit the vertical propeller on the vertical motor bell (the side without the wires). Line up the screw holes in the propeller with the holes on the motoreach part.
[* black] Fit the vertical propeller on the vertical motor bell (the side without the wires). Line up the screw holes in the propeller with the holes on the motoreach part.
[* black] Attach the prop and the motor by running two '''M3 6mm screws''' through the prop into the motor.
[* black] Tighten the first screw 3/4 of the wayabout halfway, then tightenstart the secondother screw.
[* black] Tighten each screwTurn screws until you firstthey begin to feel more resistance, like it's almostbecome tight. Then, turnThen give an additional quarter-turnquarter turn (90º).
[* black] Tighten the first screw 3/4 of the wayabout halfway, then tightenstart the secondother screw.
[* black] Tighten each screwTurn screws until you firstthey begin to feel more resistance, like it's almostbecome tight. Then, turnThen give an additional quarter-turnquarter turn (90º).