Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #5

Edit by OpenROV (Sofar)

Edit approved by OpenROV (Sofar)

Before
After
Unchanged

Step Lines

[title] Attach vertical propeller to vertical motor
[* black] Line up the holes in the propeller with the holes on the motor.
[* black] Attach the prop and the motor by running two M3'''M3 6mm screwsscrews''' through the prop into the motor.
[* black] Before fully tighteningTighten the first screw, line up and begin tighteningscrew 3/4 of the way, then tighten the second screw.
[* black] WhenTighten each screw beginsuntil you first begin to feel tight, tighten it another quartermore resistance, like it's almost tight. Then, turn an additional quarter-turn (90º).
[* black] Attach the prop and the motor by running two M3'''M3 6mm screwsscrews''' through the prop into the motor.
[* black] Before fully tighteningTighten the first screw, line up and begin tighteningscrew 3/4 of the way, then tighten the second screw.
[* black] WhenTighten each screw beginsuntil you first begin to feel tight, tighten it another quartermore resistance, like it's almost tight. Then, turn an additional quarter-turn (90º).

Image 1

Old Version

New Version