Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #30

Edit by OpenROV (Sofar)

Edit approved by OpenROV (Sofar)

Before
After
Unchanged

Step Lines

[title] Attach vertical motor cover to Trident
[* black] Use '''M3 6mm''' screws.
[* black] Turn screws until they begin to becomeget tight. Then give an additional quarter turn (90º).
[* black] Turn screws until they begin to becomeget tight. Then give an additional quarter turn (90º).
[* icon_caution] Do not over-tighten screws. Doing so can result in damage to your Trident that would require a return to OpenROV to repair.
[* black] Do a wiggle test on the motor cover to make sure it is securely attached to Trident.