Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #30

Edit by OpenROV (Sofar)

Edit approved by OpenROV (Sofar)

Before
After
Unchanged

Step Lines

[* black] Reattach the verticaltitle] Attach vertical motor mountcover to the body of the Trident using the two M3
[* black] Use '''M3 6mm'''
screws.
[* black] Turn screws until they begin to become tight. Then give an additional quarter turn (90º).
[* icon_caution] Do not over-tighten screws. Doing so can result in damage to your Trident that would require a return to OpenROV to repair.
[* black] Do a wiggle test on the motor cover to make sure it is securely attached to Trident.
[* black] Reattach the verticaltitle] Attach vertical motor mountcover to the body of the Trident using the two M3
[* black] Use '''M3 6mm'''
screws.
[* black] Turn screws until they begin to become tight. Then give an additional quarter turn (90º).
[* icon_caution] Do not over-tighten screws. Doing so can result in damage to your Trident that would require a return to OpenROV to repair.
[* black] Do a wiggle test on the motor cover to make sure it is securely attached to Trident.

Image 1

No previous image

Added