Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #24

Edit by OpenROV (Sofar)

Edit approved by OpenROV (Sofar)

Before
After
Unchanged

Step Lines

[title] Position vertical motor wires in motor cover
[* black] Holding the '''new''' vertical motor and the vertical motor cover, line up the screw holes. It doesn't have to be precise yet.
[* icon_caution] Double-check that you are using your '''new vertical motor'''.
[*
black] Position the motor wires in the motor cover's slot so that all three wires fit within the space. The order of the wires does not matter.
[* icon_note] This can be a little challenging. It's good to beBe thorough so that the motor is precisely and securely mounted and no wires get pinched.
[* icon_caution] Double-check that you are using your '''new vertical motor'''.
[*
black] Position the motor wires in the motor cover's slot so that all three wires fit within the space. The order of the wires does not matter.
[* icon_note] This can be a little challenging. It's good to beBe thorough so that the motor is precisely and securely mounted and no wires get pinched.