Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #24

Edit by OpenROV (Sofar)

Edit approved by OpenROV (Sofar)

Before
After
Unchanged

Step Lines

[*title] Position vertical motor wires in motor cover
[*
black] ReattachHolding the '''new''' vertical motor toand the vertical motor mountcover, line up the screw holes. It doesn't have to be precise yet.
[* icon_caution] Double-check that you are using your '''new vertical motor'''
.
[* black] Make sure to runPosition the motor wires through the slotted area in the mount as shown.
[* black] Tighten
motor cover's slot so that all three fit within the two M3 screws onspace. The order of the motor mountwires does not matter.
[* icon_note] This can be a little challenging. It's good to be thorough so
that hold the motor in placeis precisely and securely mounted and no wires get pinched.
[*title] Position vertical motor wires in motor cover
[*
black] ReattachHolding the '''new''' vertical motor toand the vertical motor mountcover, line up the screw holes. It doesn't have to be precise yet.
[* icon_caution] Double-check that you are using your '''new vertical motor'''
.
[* black] Make sure to runPosition the motor wires through the slotted area in the mount as shown.
[* black] Tighten
motor cover's slot so that all three fit within the two M3 screws onspace. The order of the motor mountwires does not matter.
[* icon_note] This can be a little challenging. It's good to be thorough so
that hold the motor in placeis precisely and securely mounted and no wires get pinched.

Image 1

Old Version

New Version

Image 2

Old Version

New Version