Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #4

Edit by OpenROV (Sofar)

Edit approved by OpenROV (Sofar)

Before
After
Unchanged

Step Lines

[title] Attach propellers to horizontal motors
[* black] Place a drop of Loctite into the threaded hole in the propeller.
[* black] Place the propeller onto the motor shaft. Ensure the propeller is threaded straight on the shaft and tighten fully.
[* icon_note] It helps to use your fingers around the motor bell and/or motor shaft to steady the motor while you tighten the propeller.
[* black] Wipe off excess Loctite.
[* black] Do this process for both horizontal motors and propellers.
[* icon_note] Wait at least 5 minutes before handling motors/propellers. Allow 24 hours for loctite to cure before using Trident.
[* icon_note] Wait at least 5 minutes before handling motors/propellers. Allow 24 hours for loctite to cure before using Trident.