Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #4

Edit by OpenROV (Sofar)

Edit approved by OpenROV (Sofar)

Before
After
Unchanged

Step Lines

[title] Attach propellers to rear motors
[* black] Place a drop of threadlockerloctite into the threaded hole in the propeller.
[* black] Place a drop of threadlockerloctite into the threaded hole in the propeller.
[* black] NEED PIC Place the propeller onto the motor shaft. Ensure the propeller is threaded straight on the shaft and tighten fully.
[* icon_note] It helps to use your fingers around the motor bell and/or motor shaft to steady the motor while you tighten the propeller.
[* black] Allow 24 hours for threadlockerloctite to cure.
[* black] Allow 24 hours for threadlockerloctite to cure.