Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #31

Edit by OpenROV (Sofar)

Edit approved by OpenROV (Sofar)

Before
After
Unchanged

Step Lines

[*title] Reattach horizontal motor covers
[*
black] ReplaceUse the '''Phillips head screws''' saved from step 6.
[* black] Match the tab on one side of
the motor cover and screw it down with the Phillips-head screwcorresponding space on Trident's body. The covers will only fit properly when done correctly.
[* black] Turn screws until they begin to become tight. Then give an additional quarter turn (90º).
[* icon_caution]
Do this fornot over-tighten screws. Doing so can result in damage to your Trident that would require a return to OpenROV to repair.
[* black] Attach
both horizontal motor covers.
[*title] Reattach horizontal motor covers
[*
black] ReplaceUse the '''Phillips head screws''' saved from step 6.
[* black] Match the tab on one side of
the motor cover and screw it down with the Phillips-head screwcorresponding space on Trident's body. The covers will only fit properly when done correctly.
[* black] Turn screws until they begin to become tight. Then give an additional quarter turn (90º).
[* icon_caution]
Do this fornot over-tighten screws. Doing so can result in damage to your Trident that would require a return to OpenROV to repair.
[* black] Attach
both horizontal motor covers.

Image 1

Old Version

New Version

Image 2

No previous image

Added