Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #14

Edit by OpenROV (Sofar)

Edit approved by OpenROV (Sofar)

Before
After
Unchanged

Step Lines

[title] Clean pass-throughs
[* black] Thoroughly clean the pass-throughs with cotton swabs, wipes, and isopropyl alcohol.
[* black] Make sure the area is free of sand, grit, or other debris. Clean corrosion from the pass-through connection points.
[* icon_note] This is a good time to clean out hard-to-reach spaces in the motor compartments, not just at the pass-throughs.
[* black] Dry with compressed air, or allow ample time to drydry (at least 10 minutes).
[* black] Dry with compressed air, or allow ample time to drydry (at least 10 minutes).