Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #14

Edit by OpenROV (Sofar)

Edit approved by OpenROV (Sofar)

Before
After
Unchanged

Step Lines

[* red] Clean all of the surfaces on the motor plug pass-throughs with isopropyl alcohol.
[* icon_caution] REPLACE PHOTO The picture shows the green gaskets in place but these should be removed.
[* icon_caution] REPLACE PHOTO The picture shows the green gaskets in place but these should be removed.
[* icon_caution] Make sure the area is free of sand, grit, lubricant, or other debris.
[* black] Allow to dry.