Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #14

Edit by OpenROV (Sofar)

Edit approved by OpenROV (Sofar)

Before
After
Unchanged

Step Lines

[* redtitle] Clean pass-throughs
[* black
] Clean all of the surfaces on the motor plug pass-throughs with cotton swabs, wipes, and isopropyl alcohol.
[* icon_caution] REPLACE PHOTO The picture shows the green gaskets in place but these should be removed.
[* redtitle] Clean pass-throughs
[* black
] Clean all of the surfaces on the motor plug pass-throughs with cotton swabs, wipes, and isopropyl alcohol.
[* icon_caution] REPLACE PHOTO The picture shows the green gaskets in place but these should be removed.
[* icon_caution] Make sure the area is free of sand, grit, lubricant, or other debris.
[* black] AllowDry with compressed air, or allow ample time to dry.
[* black] AllowDry with compressed air, or allow ample time to dry.

Image 1

Old Version

New Version

Image 2

No previous image

Added