Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #12

Edit by OpenROV (Sofar)

Edit approved by OpenROV (Sofar)

Before
After
Unchanged

Step Lines

[* black] From here can freely removeInsert a larger screwdriver into the space between Trident's body and the motor fromhorizontal motor, as shown in the photo.
[* icon_caution] Be very careful to only make contact with Trident's body and the motor. Avoid the pass-throughs.
[* black] Once the screwdriver is in place, gently push the screwdriver handle toward the front of Trident. This will push
the motor out of the mount.
[* black] The motors will be difficult toFully remove and require an unusual amount of leveragethe horizontal motor.
[* black] Do this for both horizontal motors
.
[* black] From here can freely removeInsert a larger screwdriver into the space between Trident's body and the motor fromhorizontal motor, as shown in the photo.
[* icon_caution] Be very careful to only make contact with Trident's body and the motor. Avoid the pass-throughs.
[* black] Once the screwdriver is in place, gently push the screwdriver handle toward the front of Trident. This will push
the motor out of the mount.
[* black] The motors will be difficult toFully remove and require an unusual amount of leveragethe horizontal motor.
[* black] Do this for both horizontal motors
.

Image 1

Old Version

New Version

Image 2

No previous image

Added