Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #8

Edit by OpenROV (Sofar)

Edit approved by OpenROV (Sofar)

Before
After
Unchanged

Step Lines

[* black] Start with one of the motors.title] Remove horizontal motor plug screws
[* redblack] Unscrew the two M2 screws that hold the motor plugsplug into the pass-through.
[* icon_note] All M2 screws use a 1.5mm hex driver.black] Do not overtighten screws. Use new screws whenever possible.this for both horizontal motors
[* black] Start with one of the motors.title] Remove horizontal motor plug screws
[* redblack] Unscrew the two M2 screws that hold the motor plugsplug into the pass-through.
[* icon_note] All M2 screws use a 1.5mm hex driver.black] Do not overtighten screws. Use new screws whenever possible.this for both horizontal motors