Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #84

Edit by Eric Dick

Edit approved by OpenROV (Sofar)

Before
After
Unchanged

Step Lines

[* black] dfgdfgYou have completed your assembly. Now it's time to install and configure the ROV software.
[* black] Refer to these instructions: https://github.com/OpenROV/openrov-software
[* black] Basic Outline:
[* black] Download Disk Image > Burn to SD-mini > Put SD-min in ROV> Connect to ROV
[* black] SSH = log into ROV to access ROV commandline
[* black] AConfig.h file = Arduino hardware configuation
[* black] USB Cable = turn on ROV
[* black] Ethernet Cable = communicate with ROV
[* black] dfgdfgYou have completed your assembly. Now it's time to install and configure the ROV software.
[* black] Refer to these instructions: https://github.com/OpenROV/openrov-software
[* black] Basic Outline:
[* black] Download Disk Image > Burn to SD-mini > Put SD-min in ROV> Connect to ROV
[* black] SSH = log into ROV to access ROV commandline
[* black] AConfig.h file = Arduino hardware configuation
[* black] USB Cable = turn on ROV
[* black] Ethernet Cable = communicate with ROV