Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #81

Edit by Matthew Valancy

Edit approved by Eric Stackpole

Before
After
Unchanged

Step Lines

[* black] Glue the remaining acrylic ring to the white thrust guard as shown.
[* black] Make sure the acrylic ring is concentric with the thrust guard and the inside ring is flush with the inside wall of the thrust guard.
[* black] Sand the bottom edges of the acrylic ring so that it fits into the ROV body.
[* black] Push the motor guard with acrylic ring into the top of the ROV for a snug fit.
[* icon_caution] '''Do not glue this assembly on to the ROV body, it is a pressure fit only.'''