Changes to Step #79
Edit by OpenROV (Sofar) —
Edit approved by OpenROV (Sofar)
- Before
- After
- Unchanged
Step Lines
| [* black] Solder the two sets of wires to each pin on the terminal block. |
| [* black] Use hot glue to secure the terminal block to the back of the case. The terminal block should fit flush against the back panel of the homeplug adapter. |
| [* black] After the hot glue has hardened, you can attach the tether from the ROV to the terminal block on the homeplug adapter. |
| [* icon_note] Because of the way the Homeplug communication protocol works it does not matter which wire goes into either terminal. Just plug the wires in in any orientation and it should work! |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added